Early WU END

[hardisk]

salut tous! je ne fais que des Eraly wu end de puis un petit moment, donc j'ai remi ma config "par défaut" et bin figurez vous que ça continue, j'en fais toujours, et sur les deux cores en plus!

Pffu c'est pas cool, car même dans ces cas là, le log n'arrive pas contacter le serveur et j eperd le bénéfice de spoints!

Ca peut venir d'où à votre avis?

 Folding@Home Gromacs Core[20:48:18] Version 1.90 (March 8, 2006)[20:48:18] [20:48:18] Preparing to commence simulation[20:48:18] - Looking at optimizations...[20:48:18] - Created dyn[20:48:18] - Files status OK[20:48:18] - Expanded 79064 -> 420497 (decompressed 531.8 percent)[20:48:18] - Starting from initial work packet[20:48:18] [20:48:18] Project: 2125 (Run 115, Clone 26, Gen 13)[20:48:18] [20:48:18] Assembly optimizations on if available.[20:48:18] Entering M.D.[20:48:24] Protein: p2125_lambda_5way_melt_4_10011[20:48:24] [20:48:24] Writing local files[20:48:24] Using table 1[20:48:24] Extra SSE boost OK.[20:48:24] Writing local files[20:48:24] Completed 0 out of 20000000 steps  (0)[21:59:48] Writing local files[21:59:48] Completed 200000 out of 20000000 steps  (1)[22:50:17] Writing local files[22:50:17] Completed 400000 out of 20000000 steps  (2)[23:35:36] Quit 101 - Fatal error: NaN detected: (ener[12])[23:35:36] [23:35:36] Simulation instability has been encountered. The run has entered a[23:35:36]   state from which no further progress can be made.[23:35:36] This may be the correct result of the simulation, however if you[23:35:36]   often see other project units terminating early like this[23:35:36]   too, you may wish to check the stability of your computer (issues[23:35:36]   such as high temperature, overclocking, etc.).[23:35:36] Going to send back what have done.[23:35:36] logfile size: 9873[23:35:36] - Writing 10436 bytes of core data to disk...[23:35:36] Done: 9924 -> 3162 (compressed to 31.8 percent)[23:35:36]   ... Done.[23:35:36] [23:35:36] Folding@home Core Shutdown: EARLY_UNIT_END[23:35:40] CoreStatus = 72 (114)[23:35:40] Sending work to server[23:35:40] + Attempting to send results[23:35:40] - Error: Could not read results file work/wuresults_05.dat from disk[23:35:40] - Error: Could not read unit 05 file. Removing from queue.[23:35:40] - Preparing to get new work unit...[23:35:40] + Attempting to get work packet[23:35:40] - Connecting to assignment server[23:35:41] - Successful: assigned to (171.65.103.160).[23:35:41] + News From Folding@Home: Welcome to Folding@Home[23:35:41] Loaded queue successfully.[23:35:43] + Closed connections[23:35:48] [23:35:48] + Processing work unit[23:35:48] Core required: FahCore_78.exe[23:35:48] Core found.[23:35:48] Working on Unit 06 [January 18 23:35:48][23:35:48] + Working ...[23:35:48] [23:35:48] *------------------------------*[23:35:48] Folding@Home Gromacs Core[23:35:48] Version 1.90 (March 8, 2006)[23:35:48] [23:35:48] Preparing to commence simulation[23:35:48] - Looking at optimizations...[23:35:48] - Created dyn[23:35:48] - Files status OK[23:35:48] - Expanded 79064 -> 420497 (decompressed 531.8 percent)[23:35:48] - Starting from initial work packet[23:35:48] [23:35:48] Project: 2125 (Run 115, Clone 26, Gen 13)[23:35:48] [23:35:48] Assembly optimizations on if available.[23:35:48] Entering M.D.[23:35:55] Protein: p2125_lambda_5way_melt_4_10011[23:35:55] [23:35:55] Writing local files[23:35:55] Using table 1[23:35:55] Extra SSE boost OK.[23:35:55] Writing local files[23:35:55] Completed 0 out of 20000000 steps  (0)[00:26:21] Writing local files[00:26:21] Completed 200000 out of 20000000 steps  (1)[01:16:41] Writing local files[01:16:41] Completed 400000 out of 20000000 steps  (2)[02:07:07] Writing local files[02:07:07] Completed 600000 out of 20000000 steps  (3)[02:57:26] Writing local files[02:57:26] Completed 800000 out of 20000000 steps  (4)[03:01:02] Quit 101 - Fatal error: NaN detected: (ener[12])[03:01:02] [03:01:02] Simulation instability has been encountered. The run has entered a[03:01:02]   state from which no further progress can be made.[03:01:02] This may be the correct result of the simulation, however if you[03:01:02]   often see other project units terminating early like this[03:01:02]   too, you may wish to check the stability of your computer (issues[03:01:02]   such as high temperature, overclocking, etc.).[03:01:02] Going to send back what have done.[03:01:02] logfile size: 11538[03:01:02] - Writing 12101 bytes of core data to disk...[03:01:02] Done: 11589 -> 3370 (compressed to 29.0 percent)[03:01:02]   ... Done.[03:01:02] [03:01:02] Folding@home Core Shutdown: EARLY_UNIT_END[03:01:04] CoreStatus = 72 (114)[03:01:04] Sending work to server

si ça peut aider voici un extrait de mon fichier log.

[Spy2]

J'ai eu le meme probleme au début avec la version console. C'etait mon o/c qui poser des probleme, peut -etre un manque de stabilitée. En tout cas j'ai tout remis pas défault et plus de probleme. Ne t'inquite pas pour t'es points il seront contabilisés.

[hardisk]

J'ai eu le meme probleme au début avec la version console. C'etait mon o/c qui poser des probleme, peut -etre un manque de stabilitée. En tout cas j'ai tout remis pas défault et plus de probleme. Ne t'inquite pas pour t'es points il seront contabilisés.

 

Pffu bin moi ça doit venir d'ailleurs!

j'ai eu ça avec les paramètres "par défaut" de ma bécane!

je viens de faire un SP2004 en blend stress RAM and CPU sur les deux cores durant deux heures, et il n'a été trouvé aucune erreur!

Là j'ai les boules! :roll:

[Thor]

jettes un oeil sur ce topic du forum de l'alliance: http://folding.mesdiscussions.net/foldingh...sujet_686_1.htm.

 

le problème ne vient pas forcément de ton pc et tu est crédité d'un nombre de points proportionnel à ce que tu as calculé.

 

tu est peut étre tombé sur une mauvaises série, maintenant il faudra voir si ça redeviens normal ou pas.

[hardisk]

jettes un oeil sur ce topic du forum de l'alliance: http://folding.mesdiscussions.net/foldingh...sujet_686_1.htm.

 

le problème ne vient pas forcément de ton pc et tu est crédité d'un nombre de points proportionnel à ce que tu as calculé.

 

tu est peut étre tombé sur une mauvaises série, maintenant il faudra voir si ça redeviens normal ou pas.

 

j'en ai eu deux nouvelles Early Wu end

c'est pénible, mais bon les résultats ont été envoyés à Stanford!

Mais je me demande, dites moi si je me trompe, EMIII a un petit voyant d'alerte, s'il detecte un problème , il passe au rouge, donc ça ne vient pas de mon OC puisqu'il n'est jamais passé au rouge! me trompe-je?

merci pour les infos^^

[foo_fight]

Le petit voyant d'EM3 n'a rien à voir avec la stabilité du PC.

Il sert juste à prévenir si le temps de calcul d'une frame est plus long que le précédent. Cela permet de relancer le client si besoin.

[hardisk]

Le petit voyant d'EM3 n'a rien à voir avec la stabilité du PC.

Il sert juste à prévenir si le temps de calcul d'une frame est plus long que le précédent. Cela permet de relancer le client si besoin.

 

et l'ampoule verte qui passe au rouge quand ya un souci? elle sert pas dire si ya un blem ou pas?

[hardisk]

bon je ne sais pas ce qui se passe, mais je n'arrive pas finir une seule wu!

ça me gonfle grave, j'ai desinstallé et re-installé un client graphique et un console, c'est pareil!

pourtant ma machine est stable puisque non overclockée! et testée avec SP2004, j' n'ai aucun blem dans mes applications, pas d'écran bleu ni de blocage de wiwi, rien qui puisse me faire penser à un problème de stabilité!

Si vous avez une solution, je suis preneur!

[Thor]

c'est pareil avec les client graphique et console ? :?

 

tu n'as pas fait de modifs sur ton pc récemment ?

 

est ce que tu peut donner les numéro de projet des WU que tu calcule ?

 

ça te l'as fait sur combien de WU ?

[Thor]

après avoir fait quelques recherches sur google et vu ce que tu décris, je penches plutot pour un problèmes sur ton pc

 

tu as de la bonne ram ?

essaye peut étre de la tester

 

si le probème ne viens pas de là, tu peut essayer de descendre la fréquence du cpu pour voir si le problème s'en va

[hardisk]

après avoir fait quelques recherches sur google et vu ce que tu décris, je penches plutot pour un problèmes sur ton pc

 

tu as de la bonne ram ?

essaye peut étre de la tester

 

si le probème ne viens pas de là, tu peut essayer de descendre la fréquence du cpu pour voir si le problème s'en va

 

alors dans l'ordre et pour répondre à tes questions, voici les réponses :

 

bonne RAM? : je pense oui, 2*1go de OCZ DDR 500 EB platinium PC4000

Descendre la fréquence de mon proco? heu je vais quand même pas l'underclocker?

Et en fait la seule chose que j'ai changé, c'est l eprocesseur, j'ai un opteron dual au lieu d'un mono, voilà!

voilà les protéine qui ont merdés : Protein: p2080_Abeta_4mer <== pour le client console, que je viens juste de reinstaller.

ensuite pour le lcient graphique voilà un aperçu de ce que j'ai dans le fichier log :

 Protein: p2124_lambda_5way_melt_4_10011[05:22:16] [05:22:16] Writing local files[05:22:16] Using table 3[05:22:16] Extra SSE boost OK.[05:22:16] Writing local files[05:22:16] Completed 0 out of 20000000 steps  (0)[05:28:50] Quit 101 - Fatal error: NaN detected: (ener[12]) Simulation instability has been encountered. The run has entered a[05:28:50]   state from which no further progress can be made.[05:28:50] This may be the correct result of the simulation, however if you[05:28:50]   often see other project units terminating early like this[05:28:50]   too, you may wish to check the stability of your computer (issues[05:28:50]   such as high temperature, overclocking, etc.).[05:28:50] Going to send back what have done.[05:28:50] logfile size: 6669[05:28:50] - Writing 7232 bytes of core data to disk...[05:28:50] Done: 6720 -> 2555 (compressed to 38.0 percent)[05:28:50]   ... Done.[05:28:50] [05:28:50] Folding@home Core Shutdown: EARLY_UNIT_END[05:28:52] CoreStatus = 72 (114)[05:28:52] Sending work to server

et la suite c'est ça :

[05:28:52] + Attempting to send results[05:28:53] + Results successfully sent[05:28:53] Thank you for your contribution to Folding@Home.[05:28:57] - Preparing to get new work unit...[05:28:57] + Attempting to get work packet[05:28:57] - Connecting to assignment server[05:28:58] - Successful: assigned to (171.65.103.160).[05:28:58] + News From Folding@Home: Welcome to Folding@Home[05:28:58] Loaded queue successfully.[05:29:01] + Closed connections[05:29:06] [05:29:06] + Processing work unit[05:29:06] Core required: FahCore_78.exe[05:29:06] Core found.[05:29:06] Working on Unit 02 [January 20 05:29:06][05:29:06] + Working ...[05:29:06] [05:29:06] *------------------------------*[05:29:06] Folding@Home Gromacs Core[05:29:06] Version 1.90 (March 8, 2006)[05:29:06] [05:29:06] Preparing to commence simulation[05:29:06] - Looking at optimizations...[05:29:06] - Created dyn[05:29:06] - Files status OK[05:29:06] - Expanded 79007 -> 420497 (decompressed 532.2 percent)[05:29:06] - Starting from initial work packet[05:29:06] [05:29:06] Project: 2124 (Run 320, Clone 53, Gen 10)[05:29:06] [05:29:06] Assembly optimizations on if available.[05:29:06] Entering M.D.[05:29:13] Protein: p2124_lambda_5way_melt_4_10011[05:29:13] [05:29:13] Writing local files[05:29:13] Using table 3[05:29:13] Extra SSE boost OK.[05:29:13] Writing local files[05:29:13] Completed 0 out of 20000000 steps  (0)[06:20:48] Writing local files[06:20:48] Completed 200000 out of 20000000 steps  (1)[06:24:36] Quit 101 - Fatal error: NaN detected: (ener[12])[06:24:36] [06:24:36] Simulation instability has been encountered. The run has entered a[06:24:36]   state from which no further progress can be made.[06:24:36] This may be the correct result of the simulation, however if you[06:24:36]   often see other project units terminating early like this[06:24:36]   too, you may wish to check the stability of your computer (issues[06:24:36]   such as high temperature, overclocking, etc.).[06:24:36] Going to send back what have done.[06:24:36] logfile size: 7777[06:24:36] - Writing 8340 bytes of core data to disk...[06:24:36] Done: 7828 -> 2870 (compressed to 36.6 percent)[06:24:36]   ... Done.[06:24:36] [06:24:36] Folding@home Core Shutdown: EARLY_UNIT_END[06:24:39] CoreStatus = 72 (114)[06:24:39] Sending work to server[06:24:39] + Attempting to send results[06:24:40] + Results successfully sent[06:24:40] Thank you for your contribution to Folding@Home.[06:24:44] - Preparing to get new work unit...[06:24:44] + Attempting to get work packet[06:24:44] - Connecting to assignment server[06:24:45] - Successful: assigned to (171.65.103.160).[06:24:45] + News From Folding@Home: Welcome to Folding@Home[06:24:46] Loaded queue successfully.[06:24:48] + Closed connections[06:24:53] [06:24:53] + Processing work unit[06:24:53] Core required: FahCore_78.exe[06:24:53] Core found.[06:24:53] Working on Unit 03 [January 20 06:24:53][06:24:53] + Working ...[06:24:53] [06:24:53] *------------------------------*[06:24:53] Folding@Home Gromacs Core[06:24:53] Version 1.90 (March 8, 2006)[06:24:53] [06:24:53] Preparing to commence simulation[06:24:53] - Looking at optimizations...[06:24:53] - Created dyn[06:24:53] - Files status OK[06:24:53] - Expanded 41385 -> 235757 (decompressed 569.6 percent)[06:24:53] - Starting from initial work packet[06:24:53] [06:24:53] Project: 2126 (Run 13, Clone 29, Gen 11)[06:24:53] [06:24:53] Assembly optimizations on if available.[06:24:53] Entering M.D.[06:24:59] Protein: p2126_villin_sigd3[06:24:59] [06:24:59] Writing local files[06:24:59] Using table 3[06:24:59] Extra SSE boost OK.[06:24:59] Writing local files[06:24:59] Completed 0 out of 50000000 steps  (0)[07:14:20] Writing local files[07:14:20] Completed 500000 out of 50000000 steps  (1)[07:33:06] Quit 101 - Fatal error: NaN detected: (ener[12])[07:33:06] [07:33:06] Simulation instability has been encountered. The run has entered a[07:33:06]   state from which no further progress can be made.[07:33:06] This may be the correct result of the simulation, however if you[07:33:06]   often see other project units terminating early like this[07:33:06]   too, you may wish to check the stability of your computer (issues[07:33:06]   such as high temperature, overclocking, etc.).[07:33:06] Going to send back what have done.[07:33:06] logfile size: 14280[07:33:06] - Writing 14843 bytes of core data to disk...[07:33:06] Done: 14331 -> 3612 (compressed to 25.2 percent)[07:33:06]   ... Done.[07:33:06] [07:33:06] Folding@home Core Shutdown: EARLY_UNIT_END[07:33:09] CoreStatus = 72 (114)[07:33:09] Sending work to server[07:33:09] + Attempting to send results[07:33:10] + Results successfully sent[07:33:10] Thank you for your contribution to Folding@Home.[07:33:14] - Preparing to get new work unit...[07:33:14] + Attempting to get work packet[07:33:14] - Connecting to assignment server[07:33:15] - Successful: assigned to (171.65.103.160).[07:33:15] + News From Folding@Home: Welcome to Folding@Home[07:33:15] Loaded queue successfully.[07:33:17] + Could not connect to Work Server[07:33:17] - Error: Attempt #1  to get work failed, and no other work to do.			 Waiting before retry.[07:33:34] + Attempting to get work packet[07:33:34] - Connecting to assignment server[07:33:34] - Successful: assigned to (171.65.103.160).[07:33:34] + News From Folding@Home: Welcome to Folding@Home[07:33:35] Loaded queue successfully.[07:33:39] + Closed connections[07:33:44] [07:33:44] + Processing work unit[07:33:44] Core required: FahCore_78.exe[07:33:44] Core found.[07:33:44] Working on Unit 04 [January 20 07:33:44][07:33:44] + Working ...[07:33:44] [07:33:44] *------------------------------*[07:33:44] Folding@Home Gromacs Core[07:33:44] Version 1.90 (March 8, 2006)[07:33:44] [07:33:44] Preparing to commence simulation[07:33:44] - Looking at optimizations...[07:33:44] - Created dyn[07:33:44] - Files status OK[07:33:44] - Expanded 78874 -> 420497 (decompressed 533.1 percent)[07:33:44] - Starting from initial work packet[07:33:44] [07:33:44] Project: 2124 (Run 104, Clone 37, Gen 11)[07:33:44] [07:33:44] Assembly optimizations on if available.[07:33:44] Entering M.D.[07:33:50] Protein: p2124_lambda_5way_melt_4_10011[07:33:50] [07:33:50] Writing local files[07:33:50] Using table 3[07:33:50] Extra SSE boost OK.[07:33:50] Writing local files[07:33:50] Completed 0 out of 20000000 steps  (0)[08:25:59] Writing local files[08:25:59] Completed 200000 out of 20000000 steps  (1)[09:18:16] Writing local files[09:18:16] Completed 400000 out of 20000000 steps  (2)[10:05:29] Quit 101 - Fatal error: NaN detected: (ener[12])[10:05:29] [10:05:29] Simulation instability has been encountered. The run has entered a[10:05:29]   state from which no further progress can be made.[10:05:29] This may be the correct result of the simulation, however if you[10:05:29]   often see other project units terminating early like this[10:05:29]   too, you may wish to check the stability of your computer (issues[10:05:29]   such as high temperature, overclocking, etc.).[10:05:29] Going to send back what have done.[10:05:29] logfile size: 9867[10:05:29] - Writing 10430 bytes of core data to disk...[10:05:29] Done: 9918 -> 3141 (compressed to 31.6 percent)[10:05:29]   ... Done.[10:05:29] [10:05:29] Folding@home Core Shutdown: EARLY_UNIT_END[10:05:32] CoreStatus = 72 (114)[10:05:32] Sending work to server[10:05:32] + Attempting to send results[10:05:34] + Results successfully sent[10:05:34] Thank you for your contribution to Folding@Home.[10:05:39] - Preparing to get new work unit...[10:05:39] + Attempting to get work packet[10:05:39] - Connecting to assignment server[10:05:39] - Successful: assigned to (171.65.103.163).[10:05:39] + News From Folding@Home: Welcome to Folding@Home[10:05:40] Loaded queue successfully.[10:05:45] + Closed connections[10:05:50] [10:05:50] + Processing work unit[10:05:50] Core required: FahCore_80.exe[10:05:50] Core not found.[10:05:50] - Core is not present or corrupted.[10:05:50] - Attempting to download new core...[10:05:50] + Downloading new core: FahCore_80.exe[10:05:52] + 10240 bytes downloaded[10:05:52] + 20480 bytes downloaded[10:05:52] + 30720 bytes downloaded[10:05:52] + 40960 bytes downloaded[10:05:52] + 51200 bytes downloaded[10:05:52] + 61440 bytes downloaded[10:05:52] + 71680 bytes downloaded[10:05:53] + 81920 bytes downloaded[10:05:53] + 92160 bytes downloaded[10:05:53] + 102400 bytes downloaded[10:05:53] + 112640 bytes downloaded[10:05:53] + 122880 bytes downloaded[10:05:53] + 133120 bytes downloaded[10:05:53] + 143360 bytes downloaded[10:05:53] + 153600 bytes downloaded[10:05:53] + 163840 bytes downloaded[10:05:53] + 174080 bytes downloaded[10:05:53] + 184320 bytes downloaded[10:05:53] + 194560 bytes downloaded[10:05:53] + 204800 bytes downloaded[10:05:53] + 215040 bytes downloaded[10:05:53] + 225280 bytes downloaded[10:05:53] + 235520 bytes downloaded[10:05:53] + 245760 bytes downloaded[10:05:53] + 256000 bytes downloaded[10:05:53] + 266240 bytes downloaded[10:05:53] + 276480 bytes downloaded[10:05:53] + 286720 bytes downloaded[10:05:53] + 296960 bytes downloaded[10:05:53] + 307200 bytes downloaded[10:05:53] + 317440 bytes downloaded[10:05:53] + 327680 bytes downloaded[10:05:54] + 337920 bytes downloaded[10:05:54] + 348160 bytes downloaded[10:05:54] + 358400 bytes downloaded[10:05:54] + 368640 bytes downloaded[10:05:54] + 378880 bytes downloaded[10:05:54] + 389120 bytes downloaded[10:05:54] + 399360 bytes downloaded[10:05:54] + 409600 bytes downloaded[10:05:54] + 419840 bytes downloaded[10:05:54] + 430080 bytes downloaded[10:05:54] + 440320 bytes downloaded[10:05:54] + 450560 bytes downloaded[10:05:54] + 460800 bytes downloaded[10:05:54] + 471040 bytes downloaded[10:05:54] + 481280 bytes downloaded[10:05:54] + 491520 bytes downloaded[10:05:54] + 501760 bytes downloaded[10:05:54] + 512000 bytes downloaded[10:05:54] + 522240 bytes downloaded[10:05:54] + 532480 bytes downloaded[10:05:54] + 542720 bytes downloaded[10:05:54] + 552960 bytes downloaded[10:05:54] + 563200 bytes downloaded[10:05:54] + 573440 bytes downloaded[10:05:54] + 583680 bytes downloaded[10:05:54] + 593920 bytes downloaded[10:05:54] + 604160 bytes downloaded[10:05:54] + 614400 bytes downloaded[10:05:54] + 624640 bytes downloaded[10:05:54] + 634880 bytes downloaded[10:05:54] + 645120 bytes downloaded[10:05:54] + 655360 bytes downloaded[10:05:54] + 665600 bytes downloaded[10:05:54] + 675840 bytes downloaded[10:05:54] + 686080 bytes downloaded[10:05:55] + 696320 bytes downloaded[10:05:55] + 706560 bytes downloaded[10:05:55] + 716800 bytes downloaded[10:05:55] + 727040 bytes downloaded[10:05:55] + 737280 bytes downloaded[10:05:55] + 747520 bytes downloaded[10:05:55] + 757760 bytes downloaded[10:05:55] + 768000 bytes downloaded[10:05:55] + 778240 bytes downloaded[10:05:55] + 788480 bytes downloaded[10:05:55] + 798720 bytes downloaded[10:05:55] + 808960 bytes downloaded[10:05:55] + 819200 bytes downloaded[10:05:55] + 825683 bytes downloaded[10:05:55] Verifying core Core_80.fah...[10:05:55] Signature is VALID[10:05:55] [10:05:55] Trying to unzip core FahCore_80.exe[10:05:55] Decompressed FahCore_80.exe (2392064 bytes) successfully[10:05:55] + Core successfully engaged[10:06:00] [10:06:00] + Processing work unit[10:06:00] Core required: FahCore_80.exe[10:06:00] Core found.[10:06:00] Working on Unit 05 [January 20 10:06:00][10:06:00] + Working ...[10:06:00] [10:06:00] *------------------------------*[10:06:00] Folding@Home Gromacs SREM Core[10:06:00] Version 1.02 (Dec 15, 2006)[10:06:00] [10:06:00] Preparing to commence simulation[10:06:00] - Looking at optimizations...[10:06:00] - Created dyn[10:06:00] - Files status OK[10:06:01] - Expanded 418197 -> 1950946 (decompressed 466.5 percent)[10:06:01] - Starting from initial work packet[10:06:01] [10:06:01] Project: 2905 (Run 34, Clone 11, Gen 3)[10:06:01] [10:06:01] Assembly optimizations on if available.[10:06:01] Entering M.D.[10:06:07] Protein: p2905_GCAA_TETRALOOP_HAIRPIN_SREM[10:06:07] [10:06:07] Writing local files[10:06:50] Extra SSE boost OK.[10:06:50] Writing local files[10:06:50] Completed 0 out of 1500000 steps  (0)[10:40:12] Writing local files[10:40:12] Completed 15000 out of 1500000 steps  (1)[11:13:33] Writing local files[11:13:33] Completed 30000 out of 1500000 steps  (2)[11:21:45] + Working...[11:47:14] Writing local files[11:47:14] Completed 45000 out of 1500000 steps  (3)[12:20:34] Writing local files[12:20:34] Completed 60000 out of 1500000 steps  (4)[12:53:51] Writing local files[12:53:51] Completed 75000 out of 1500000 steps  (5)[13:27:08] Quit 101 - Fatal error: [13:27:08] Step 89986, time 179.972 (ps)  LINCS WARNING[13:27:08] relative constraint deviation after LINCS:[13:27:08] max 0.000000 (between atoms 1 and 2) rms 1.#QNAN0[13:27:08] [13:27:08] Simulation instability has been encountered. The run has entered a[13:27:08]   state from which no further progress can be made.[13:27:08] This may be the correct result of the simulation, however if you[13:27:08]   often see other project units terminating early like this[13:27:08]   too, you may wish to check the stability of your computer (issues[13:27:08]   such as high temperature, overclocking, etc.).[13:27:08] Going to send back what have done.[13:27:08] logfile size: 8873[13:27:08] - Writing 9550 bytes of core data to disk...[13:27:08] Done: 9038 -> 3448 (compressed to 38.1 percent)[13:27:08]   ... Done.[13:27:08] [13:27:08] Folding@home Core Shutdown: EARLY_UNIT_END[13:27:11] CoreStatus = 72 (114)[13:27:11] Sending work to server[13:27:11] + Attempting to send results[13:27:12] + Results successfully sent[13:27:12] Thank you for your contribution to Folding@Home.[13:27:16] - Preparing to get new work unit...[13:27:16] + Attempting to get work packet[13:27:16] - Connecting to assignment server[13:27:17] - Successful: assigned to (171.65.103.160).[13:27:17] + News From Folding@Home: Welcome to Folding@Home[13:27:17] Loaded queue successfully.[13:27:20] + Closed connections[13:27:25] [13:27:25] + Processing work unit[13:27:25] Core required: FahCore_78.exe[13:27:25] Core found.[13:27:25] Working on Unit 06 [January 20 13:27:25][13:27:25] + Working ...[13:27:25] [13:27:25] *------------------------------*[13:27:25] Folding@Home Gromacs Core[13:27:25] Version 1.90 (March 8, 2006)[13:27:25] [13:27:25] Preparing to commence simulation[13:27:25] - Looking at optimizations...[13:27:25] - Created dyn[13:27:25] - Files status OK[13:27:25] - Expanded 78970 -> 420497 (decompressed 532.4 percent)[13:27:25] - Starting from initial work packet[13:27:25] [13:27:25] Project: 2124 (Run 132, Clone 90, Gen 7)[13:27:25] [13:27:25] Assembly optimizations on if available.[13:27:25] Entering M.D.[13:27:31] Protein: p2124_lambda_5way_melt_4_10011[13:27:31] [13:27:31] Writing local files[13:27:31] Using table 3[13:27:31] Extra SSE boost OK.[13:27:31] Writing local files[13:27:31] Completed 0 out of 20000000 steps  (0)[14:19:22] Writing local files[14:19:22] Completed 200000 out of 20000000 steps  (1)[15:03:24] Quit 101 - Fatal error: NaN detected: (ener[12])[15:03:24] [15:03:24] Simulation instability has been encountered. The run has entered a[15:03:24]   state from which no further progress can be made.[15:03:24] This may be the correct result of the simulation, however if you[15:03:24]   often see other project units terminating early like this[15:03:24]   too, you may wish to check the stability of your computer (issues[15:03:24]   such as high temperature, overclocking, etc.).[15:03:24] Going to send back what have done.[15:03:24] logfile size: 8758[15:03:24] - Writing 9321 bytes of core data to disk...[15:03:24] Done: 8809 -> 3024 (compressed to 34.3 percent)[15:03:24]   ... Done.[15:03:24] [15:03:24] Folding@home Core Shutdown: EARLY_UNIT_END[15:03:27] CoreStatus = 72 (114)[15:03:27] Sending work to server[15:03:27] + Attempting to send results[15:03:28] + Results successfully sent[15:03:28] Thank you for your contribution to Folding@Home.[15:03:32] - Preparing to get new work unit...[15:03:32] + Attempting to get work packet[15:03:32] - Connecting to assignment server[15:03:33] - Successful: assigned to (171.65.103.160).[15:03:33] + News From Folding@Home: Welcome to Folding@Home[15:03:33] Loaded queue successfully.[15:03:36] + Closed connections[15:03:41] [15:03:41] + Processing work unit[15:03:41] Core required: FahCore_78.exe[15:03:41] Core found.[15:03:41] Working on Unit 07 [January 20 15:03:41][15:03:41] + Working ...[15:03:41] [15:03:41] *------------------------------*[15:03:41] Folding@Home Gromacs Core[15:03:41] Version 1.90 (March 8, 2006)[15:03:41] [15:03:41] Preparing to commence simulation[15:03:41] - Looking at optimizations...[15:03:41] - Created dyn[15:03:41] - Files status OK[15:03:41] - Expanded 78962 -> 420497 (decompressed 532.5 percent)[15:03:41] - Starting from initial work packet[15:03:41] [15:03:41] Project: 2124 (Run 255, Clone 90, Gen 6)[15:03:41] [15:03:41] Assembly optimizations on if available.[15:03:41] Entering M.D.[15:03:47] Protein: p2124_lambda_5way_melt_4_10011[15:03:47] [15:03:47] Writing local files[15:03:47] Using table 3[15:03:47] Extra SSE boost OK.[15:03:47] Writing local files[15:03:47] Completed 0 out of 20000000 steps  (0)[15:54:56] Writing local files[15:54:56] Completed 200000 out of 20000000 steps  (1)[16:46:39] Writing local files[16:46:39] Completed 400000 out of 20000000 steps  (2)[17:21:45] + Working...[17:42:01] Writing local files[17:42:01] Completed 600000 out of 20000000 steps  (3)[18:13:06] Quit 101 - Fatal error: NaN detected: (ener[12])[18:13:06] [18:13:06] Simulation instability has been encountered. The run has entered a[18:13:06]   state from which no further progress can be made.[18:13:06] This may be the correct result of the simulation, however if you[18:13:06]   often see other project units terminating early like this[18:13:06]   too, you may wish to check the stability of your computer (issues[18:13:06]   such as high temperature, overclocking, etc.).[18:13:06] Going to send back what have done.[18:13:06] logfile size: 10974[18:13:06] - Writing 11537 bytes of core data to disk...[18:13:06] Done: 11025 -> 3276 (compressed to 29.7 percent)[18:13:06]   ... Done.[18:13:06] [18:13:06] Folding@home Core Shutdown: EARLY_UNIT_END[18:13:10] CoreStatus = 72 (114)[18:13:10] Sending work to server[18:13:10] + Attempting to send results[18:13:11] + Results successfully sent[18:13:11] Thank you for your contribution to Folding@Home.[18:13:15] - Preparing to get new work unit...[18:13:15] + Attempting to get work packet[18:13:15] - Connecting to assignment server[18:13:17] - Successful: assigned to (171.65.103.160).[18:13:17] + News From Folding@Home: Welcome to Folding@Home[18:13:17] Loaded queue successfully.[18:13:21] + Closed connections[18:13:26] [18:13:26] + Processing work unit[18:13:26] Core required: FahCore_78.exe[18:13:26] Core found.[18:13:26] Working on Unit 08 [January 20 18:13:26][18:13:26] + Working ...[18:13:26] [18:13:26] *------------------------------*[18:13:26] Folding@Home Gromacs Core[18:13:26] Version 1.90 (March 8, 2006)[18:13:26] [18:13:26] Preparing to commence simulation[18:13:26] - Looking at optimizations...[18:13:26] - Created dyn[18:13:26] - Files status OK[18:13:26] - Expanded 78946 -> 420497 (decompressed 532.6 percent)[18:13:26] - Starting from initial work packet[18:13:26] [18:13:26] Project: 2124 (Run 28, Clone 34, Gen 16)[18:13:26] [18:13:26] Assembly optimizations on if available.[18:13:26] Entering M.D.[18:13:33] Protein: p2124_lambda_5way_melt_4_10011[18:13:33] [18:13:33] Writing local files[18:13:33] Using table 3[18:13:33] Extra SSE boost OK.[18:13:33] Writing local files[18:13:33] Completed 0 out of 20000000 steps  (0)[19:05:34] Writing local files[19:05:34] Completed 200000 out of 20000000 steps  (1)[19:57:47] Writing local files[19:57:47] Completed 400000 out of 20000000 steps  (2)[20:50:03] Writing local files[20:50:03] Completed 600000 out of 20000000 steps  (3)[21:23:38] Quit 101 - Fatal error: NaN detected: (ener[12])[21:23:38] [21:23:38] Simulation instability has been encountered. The run has entered a[21:23:38]   state from which no further progress can be made.[21:23:38] This may be the correct result of the simulation, however if you[21:23:38]   often see other project units terminating early like this[21:23:38]   too, you may wish to check the stability of your computer (issues[21:23:38]   such as high temperature, overclocking, etc.).[21:23:38] Going to send back what have done.[21:23:38] logfile size: 10975[21:23:38] - Writing 11538 bytes of core data to disk...[21:23:38] Done: 11026 -> 3263 (compressed to 29.5 percent)[21:23:38]   ... Done.[21:23:38] [21:23:38] Folding@home Core Shutdown: EARLY_UNIT_END[21:23:42] CoreStatus = 72 (114)[21:23:42] Sending work to server

[Thor]

alors dans l'ordre et pour répondre à tes questions, voici les réponses :

bonne RAM? : je pense oui, 2*1go de OCZ DDR 500 EB platinium PC4000

tu devrais quand meme la tester ou essayer avec une seule barettes à la fois

 

Descendre la fréquence de mon proco? heu je vais quand même pas l'underclocker?

Je me doutes bien que tu ne va pas le laisser en dessous de ça fréquence d'origine

mais tu pourrais essayer de calculer une WU comme ça, au moins tu serais fixé. ;-)

tu as essayé de faire un occt ou un autre logiciel pour controler la stablité sur ton proc ?

[cyb]

bon je voulais coller un lien interressant sur les barette OCZ mais mon ctrl c et ctrl v ne fonctionne plus je sait pas pourquoi chiotte !!!! :evil: :evil:

[Thor]

et avec le clic droit, ça ne marches pas non plus ?

[cyb]

non copier coller rien a faire taper dans google (imcompatibilité foding home ) et vous trouverai le lien en premiere page

[Thor]

quand je tapes incompatibilité folding home, le premier que je trouves, c'et http://fhttp://folding.stanford.edu/french...rench/news.html et il ne parles pas d'ocz :?

 

tu as essayé en surlignant l'url en cliquant dessus et en essayant de l'ammener dans le corps de ton message ?

[cyb]

alors la j y comprend rien !! en fait c est que sur internet que sa marche pas je peu copier coller ce que je veu sur mon pc mais aucune url !!

[Thor]

tu as essayé avec un autre navigateur ?

[cyb]

http://forumv2.tomshardware.fr/viewtopic.p...809e78f8c97c56c

 

j ai tout tapé a la main

meme avec explorer sa ne marche point

[hardisk]

mais tu pourrais essayer de calculer une WU comme ça, au moins tu serais fixé. Wink

tu as essayé de faire un occt ou un autre logiciel pour controler la stablité sur ton proc ?

 

Je veux bien essayer de baisser la fréquence de mon proco, mais bon...

essayé de faire un OCCT? heu oui ça marche sans problème j'en ai fait plusieurs et en incluant les ram!

non honnetement je ne vois pas d'où ça peut venir.

J'ai regardé ton lien Cyber, moi jen 'ai aucun problème d'incompatiblité avec ma RAM, DFI la recommande sur son site^^

De plus je le répète, je n'ai aucun plantage, ni dans mes applications bureautique, et encore moins dans les jeux!

Je n'ai jamais vu l'écran bleu, sauf quand je montais trop haut l'O/C, sinon rien à dire! tout marche bien!

ce soir je laisserai tourner memtest histoire de vérifier que mes ram ne soient pas merdique!

Je serai fixé demain matin^^

[cyb]

mais tu pourrais essayer de calculer une WU comme ça, au moins tu serais fixé. Wink

tu as essayé de faire un occt ou un autre logiciel pour controler la stablité sur ton proc ?

 

Je veux bien essayer de baisser la fréquence de mon proco, mais bon...

essayé de faire un OCCT? heu oui ça marche sans problème j'en ai fait plusieurs et en incluant les ram!

non honnetement je ne vois pas d'où ça peut venir.

J'ai regardé ton lien Cyber, moi jen 'ai aucun problème d'incompatiblité avec ma RAM, DFI la recommande sur son site^^

De plus je le répète, je n'ai aucun plantage, ni dans mes applications bureautique, et encore moins dans les jeux!

Je n'ai jamais vu l'écran bleu, sauf quand je montais trop haut l'O/C, sinon rien à dire! tout marche bien!

ce soir je laisserai tourner memtest histoire de vérifier que mes ram ne soient pas merdique!

Je serai fixé demain matin^^

 

oups c 'etait pas le bon topic

[foo_fight]

Moi je ne pense pas que les EUE que tu fais soient liées à ton matos (surtout avec le CPU à fréquences stock). Il se peut que le client arrête les calculs car la simulation est partie dans un direction non scientifiquement correcte. J'ai vu ça sur le site de l'AF.

Tiens nous au courrant si le problème perdure.

[Thor]

c'est aussi ce que je pensais au début, mais d'après ce que dit hardisk, ça le lui fait sur toutes les WU qu'il calcule depuis quelques temps, c'est pour ça que je penses plutot à un problème hardware

[cyb]

est ce qu'il a changer quelque chose sur son pc recemment ?

[foo_fight]

Yep

Je crois qu'il faut poster sur le forum de l'AF pour avoir l'avis des spécialistes de la lecture du ficher de log.